A&D Weighing SV-100 - Manual (Page 38)

36
Data Output Format (type)
The output format appropriate for the device connected to RS-232C can be selected.
Parameter Settings Description
0 A&D standard format Used with the printer MODE 1 or MODE 2 when the optional compact
printer, AD-8121B is connected. Only the viscosity value is output.
1 • D.P. format
Used with the printer MODE 3 when the optional compact
printer, AD-8121B is connected.
With "prt 0" or "prt 1" selected for "Data output mode (prt)",
output contents can be selected by the settings of "5-at",
"5-td" and "5-ed".
With "prt 2" selected for "Data output mode (prt)", only the
viscosity value is output.
2 CSV format
Appropriate when a personal computer is used to collect data.
Measurement values are output in comma separated format.
With "5-td" and "id" settings, the date/time and ID number
can be added to the measurement data.
When a comma is selected as the decimal point by "pnt 1", a
semicolon ";" is used as a data separator.
The viscosity value and the temperature are output using the
internal resolution. *3
3 RsVisco format Used with the graphing program RsVisco.
When a measurement is started using RsVisco, the viscometer
automatically selects this format.
The viscosity value and the temperature are output using the
internal resolution.*3
*3 The relation between the measuring unit and the internal resolution is as follows:
Viscosity Temperature
Model
mPa･s Pa･s cP P °Ｃ °Ｆ
SV-10 0.01 0.0001 0.01 0.0001 Internal
resolution SV-100
- 0.01 - 0.1
0.01 0.01
Measurement Elapsed Time Output (5-at)
Parameter Settings Description
0 No output
1 • Output
With D.P. format selected, whether or not to add the
measurement elapsed time (the time elapsed from a
measurement start) to the measurement data can be selected.
For examples of output format, refer to "7-4 Data Output
Format Examples".