A&D Weighing SV-100 - Manual (Page 40)

38
Setting the ID number
1 In the standby mode, press and hold the
MODE key to enter the function setting
mode. " Cladj " appears.
2 Press the MODE key to select " id ".
3 Press the PRINT key to enter the ID number
setting mode.
4 Set the ID number using the following keys:
MODE key Switches the blinking digits.
START key Increases the value of the
blinking digit by one.
HOLD key Decreases the value of the
blinking digit by one.
STOP key Cancel the operation.
5 Press the PRINT key to save the setting.
After " end ", the next item is displayed.
6 Press the STOP key to return to the standby
mode.