A&D Weighing SV-100 User Manual
Page 61
59
*1 When a sample cup of 45 mL is used.
*2 Repetitive
measurement
with the sensor plates remaining in the sample
*3 The value after calibration using a standard viscosity fluid at a temperature range
between 20°C and 30°C with no condensation.
In a measurement that takes a long time, perform calibration using a standard viscosity
fluid or purified water periodically, as necessary.
*4 The unit switches to Pa
⋅s.
*5 The operating temperature of each standard and optional accessory is as follows:
Sample cup (Standard and optional)
AX-SV-33:
0 to 120°C
Small sample cup (Optional)
AX-SV-34:
0 to 120°C
Glass sample cup (Optional)
AX-SV-35:
0 to 230°C
Water jacket assembly (Optional)
AX-SV-37:
0 to 100°C
Glass storage container (Optional)
AX-SV-38:
0 to 180°C (Lid: 80°C max.)
Take the operating temperature shown above into considerations when using the above
items.