A&D Weighing SV-100 - Manual (Page 44)

42
7-4-2 D.P. Format
Used with the printer MODE 3 when the optional compact printer, AD-8121B is connected.
With "prt 0" or "prt 1" selected for "Data output mode (prt)", output contents can be selected by
the settings of "5-at", "5-td" and "5-ed".
With "prt 2" selected for "Data output mode (prt)", only the viscosity value is output
Shown below are SV-10 printing examples.
Printing format example (1)
Function setting
( √=Output Blank=No output)
5-at 1
Measurement
elapsed time
√
5-td 1 Date/time √
Remarks √
Device ID
information
5-ed 2
Signature
√
Printing format example (2)
Function setting
( √=Output Blank=No output)
5-at 1
Measurement
elapsed time
√
5-td 1 Date/time √
Remarks √
Device ID
information
5-ed 1
Signature
Printing format example (3)
Function setting
( √=Output Blank=No output)
5-at 1
Measurement
elapsed time
√
5-td 1 Date/time √
Remarks
Device ID
information
5-ed 0
Signature
(*) The displaying order of the date (YMD/DMY/MDY) depends on the setting of "Date/Time
(Cladj)".