AERCO AM Series Boiler User Manual - Manual (Page 30)

AM Series Boilers and Water Heaters
CHAPTER 3 – INSTALLATION
Page 30 of 156 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0100_0B
PRI - 07/14/14
Ph.: 800-526-0288
GF-146
Figure 3-2: Recommended Minimum Clearances for Servicing (AM750 / AM1000)
NOTE
Service clearances are minimum required clearances for ease of
access, but larger service clearances are always preferred.
3.6 Clearances to Combustible Material
This unit may be installed directly onto a floor of combustible material with the following
clearances:
Table 3-1: Unit Installation Clearance Dimensions
Component Clearance Distance
Ceiling 2 inches (51 mm)
Front 2 inches (51 mm)
Rear 2 inches (51 mm)
Sides 2 inches (51 mm)
Floor 0 inches (0 mm)
Concentric vent 0 inches (0 mm)
Split vent (two pipes) first 3 feet from the boiler
1 inch (25 mm)
Split vent (two pipes) after 3 feet from the boiler 0 inches (0 mm)
Boiler piping ¼ inch (7 mm)