Removing the door trim, Drop-in trim, Snap-on trivet – Whirlpool 3VED23DQDW00 User Manual
Page 11: Adjusting the wine rack, On some models)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the door trim
Drop-in trim
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull straight up on the trim piece at
each end.
To replace the trim piece:
1. Locate each end of the trim piece
above the trim pocket opening.
2. Push the trim piece straight down until
it stops.
3. Replace items on the shelf.
Snap-on trivet
To remove the trivet:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end.
3. Lift trivet straight out.
To replace the trivet:
1. Line up ends of the trivet with the
button on the door liner wall.
2. Push trivet straight back until it snaps
securely into place.
3. Replace items on the shelf.
Adjusting the wine rack
(on some models)
To remove the wine rack:
1. Lift front of wine rack.
2. Pull rack off rear-support.
3. Replace in reverse order.
10