Removing the meat drawer and cover, Adjusting the meat drawer temperature, Adjusting the meat drawer – Whirlpool 3VED23DQDW00 User Manual
Page 15: Temperature, Adjusting the crisper humidity control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
c
Humidity Controi
You can controi the amount of humidity
in the moisture-seaied crispers. Adjust
the controi to any setting between LOW
and HiGH.
• LOW (open) iets moist air out of the
crisper for best storage of fruits and
vegetabies with skins.
• HiGH (ciosed) keeps moist air in the
crisper for best storage of fresh, ieafy
vegetabies.
Adjusting the crisper humidity control
(on some models)
Pull out to the stop, lift the
front, and pull again.
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer straight out to
the stop.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer and crisper.
2. Lift front of cover off supports.
3. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports
on walls of refrigerator.
2. Lower front into place.
3. Replace meat drawer and crisper.
Adjusting the meat drawer temperature
Cold air from the freezer flows into the
meat drawer. This helps keep the meat
drawer colder than the rest of the
refrigerator for better storage of meats.
Slide the control from side to side to
let more or less cold air through.
Use control to
14