Whirlpool 3VED23DQDW00 - Manual (Page 13)

To slide shelf side-to-side:
1. Lift slightly on shelf front.
2. Slide to desired location.
3. Lower shelf front to level position.
NOTE: You do not have to remove small
items from the shelf before moving it
side-to-side. You may need to remove
larger items.
Adjusting the EZ-TRACK* shelf
(on some models)
Lift front slightly. Then slide to new
location.
To remove the shelf:
1. Remove all items from the shelf.
2. Hold back of shelf with one hand.
3. Lift front of shelf to 45° angle.
4. Lower shelf slightly to release shelf
from upper channel track. Then pull
shelf straight out.
NOTE: Shelf is heavy. Make sure you
use both hands when removing shelf.
To remove shelf track:
1. Lift both sides of track slightly.
2. Pull track straight out.
Hold with both hands and lift front to
45° angle.
Hold both sides and lift up and out.
To replace shelf track:
1. Guide track hooks into the shelf
support slots on the back wall of the
cabinet.
NOTE: Make sure both track hooks
are in slots and that the slots are
parallel to each other.
2. Push track backward and down.
3. Check that track is completely seated
in the shelf supports.
Shelf support
Make sure both sets of hooks are in
support slots.
12