Whirlpool 3VED23DQDW00 - Manual (Page 14)

To reinstall shelf:
1. Hold shelf at front and back.
2. Tilt front of shelf up to a 45° angle to
track.
3. Insert both rear shelf slides into upper
channel of track.
4. Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides
are securely in the track before letting go
of shelf.
Upper channel of track
Insert rear shelf slides
into upper channei of track.
Removing the crisper and crisper cover
To remove the crisper:
1. Slide the crisper straight out to the
stop.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
Pull out to
the stop, lift
the front,
and pull
again.
Style 1
To remove the cover:
1. Hold cover firmly with both hands and
lift front of cover off supports.
2. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports
on walls of refrigerator.
2. Lower front into place.
Lift the
cover
front, then
the back.
Style 2
To remove the cover:
1. Push up glass insert from the bottom,
then slide out with both hands.
2. Lift front of cover frame.
3. Lift cover frame up and out.
To replace the cover:
1. Fit back of cover frame into notch
supports on walls of refrigerator, then
lower front into place.
2. Slide back of glass insert into place,
then lower front into place.
13