The water dispenser, The dispenser light – Whirlpool 3VED23DQDW00 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2.

Press a

sturdy

glass against the ice

dispenser bar. Hold glass close to
dispenser opening so ice does not fall
outside of glass.

3. Remove the glass to stop dispensing.

NOTE:

The first few batches of ice may

have an off-flavor from new plumbing
and parts. Throw the ice away. Also,
large amounts of ice should be taken
from the ice bin, not through the dis­
penser.

The water dispenser

Chilled water comes from a tank behind
the meat drawer. It holds approximately

1.5 L

(V

/2

quarts).

When you first hook up the refrigera­

tor, press the water dispenser bar with a
glass or jar until you have drawn and
discarded 1.9 to 2.8 L (2 or 3 quarts).
The water you draw and discard will

rinse the tank and pipes.

Allow several hours to chill a new

tankful.

NOTE:

The small tray beneath the

dispenser is designed to evaporate

small

spills. There is no drain in this

tray.

Do not

pour water into it.

To dispense water:

1

. Press a

sturdy

glass against the

water dispenser bar.

2. Remove the glass to stop dispensing.

NOTE:

Dispense enough water every

week to maintain a fresh supply.

The dispenser light

To turn on night light,

slide dispenser

LIGHT switch to the left. See page 20 for
directions for changing the dispenser
light bulb.

WATER

18

Advertising