Solving common ice maker/dispenser problems, Solving common ice maker/ dispenser problems – Whirlpool 3VED23DQDW00 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Solving common ice maker/dispenser
problems

PROBLEM

CAUSE

SOLUTIONS

Ice dispenser

• Freezer door open

• Close the freezer door.

won’t work

• Ice bin not properly

installed

• Make sure bin is pushed in all the way.

• Wrong ice in bin

• Use only crescents from ice maker.

Shake the bin occasionally to keep

cubes separated and to increase
storage room.

• Dispenser not used

for extended periods,
causing ice cubes to

melt together

• Dump old ice and make a new supply.

Ice dispenser

• Ice dispenser bar

• Wait about 3 minutes for the dispenser

stops working

held in too long

motor to reset.

• Large amounts of ice should be taken

from the bin,

not through the

dispenser.

Off-taste or

• Ice attracts airborne

• Dump old ice and make a new supply.

odor in ice

odors; old ice

Store excess ice in covered container.

• Water quality

• Water containing minerals (such as

sulfur) may require a filter to remove.

• Foods not properly

wrapped

• Wrap properly. See page 26.

• Ice bin and freezer

• Clean freezer and ice bin. See

may need cleaning

cleaning chart on page 22.

• Plumbing to

• Follow Installation Instructions for

ice maker

proper ice maker water supply hookup.
(See back of refrigerator cabinet.)

• New ice maker

• The first few loads of ice from a new

ice maker may have an off-taste.
Dump ice and make a new supply.

19

Advertising