Removing the doors, Please read these helpful hints before you start – Whirlpool 3VED23DQDW00 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/663038/28/background.png)
Removing the Doors
Magnetic
gasket
Please read these helpful hints before
you start
• Before you start, either unplug the
Cabinet
refrigerator or disconnect the electricity
leading to it at the main power supply
and remove any food from door
shelves.
• When removing hinges, keep doors
closed until ready to lift free from
cabinet.
• To remove doors, start at the top hinge
and work down.
• To replace doors, start at the bottom
hinge and work up.
• Line up doors so they are centered
between the sides of the cabinet and
are parallel with each other.
• If refrigerator light does not go out
when door is closed, the door may be
too low. Use a thicker spacer if
necessary.
• Door seal may be adjusted by removing
the top hinge and adding or removing
shims to the bottom hinge.
• Set the door gap at
17.5
mm (^Vi6 inch).
The diameter of a dime is about right.
See figure.
• The refrigerator must be level and
sitting on a solid floor.
8 mm (5/16")
hex-head
hinge screw
Countersink
handle
screw
Oval sealing
screw
(use on bot
toms of doors)
Handle
screw
Oval sealing
screw (use
on tops of
doors)
27