Using the gas surface burners, Before lighting a gas burner, After lighting a gas burner – GE CGS990SETSS User Manual

Page 6: How to light a gas surface burner, Sealed gas burners, Awarning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Using the gas surface burners.

Throughout this manual, features and appearance may vary from your model.

Before Lighting a Gas Burner

■ Make sure all burners are in place.

■ Make sure all grates on the range are

properly placed before using any burner.

■ If your range has the Gos/Control Lockout

feature, moke sure it is disabled before

attempting to light the surface burners.

After Lighting a Gas Burner

■ Do not operate the burner for on extended

period of time without cookware on the
grate. The finish on the grate may chip

without cookware to absorb the heat.

■ Be sure the burners and grates ore cool

before you place your hand, a pot holder,
cleaning cloths or other materials on them.

Push the control knob In and turn
It to the

LITE

position.

How to Light a Gas Surface Burner

AWARNING

Burner flames that

are not covered by cookware may present a risk
of fire or clothing ignition. The griddle burner
should only be used with the griddle in place.
Failure to do so may result in serious injury.

Make sure all the surface burners are placed in

their respective positions.

Push the control knob in and turn it to the LITE position.

You will hear a little clicking noise—the sound
of the electric spark igniting the burner.

Turn the knob to adjust the flame size. If the

knob stays at LITE, it will continue to click.

When one burner is turned to LITE, all the

burners spark. Do not attempt to disassemble
or clean around any burner while another
burner is on. An electric shock may result, which
could cause you to knock over hot cookware.

Medium

Small

burner Ion

some models)

Bridge burner

Ion some

models)

Sealed Gas Burners

Your gas range cooktop has sealed gas

burners. They offer convenience, cleanability
and flexibility to be used in a wide range of
cooking applications.

The smallest burner in the right rear position

is the simmer burner. On some models, the
right front position triple flame burner will be

the simmer burner. This burner can be turned

down to S/Mfor a very low simmer setting.
It provides precise cooking performance for
delicate foods such as sauces or foods that
require low heat for a long cooking time.

The medium (left rear) and the large (left
front) burners are the primary burners
for most cooking. These general-purpose

burners can be turned down from HI to LO to
suit a wide range of cooking needs.

The extra large burner (right front, triple flame

burner, or left front burner on some models) are

the maximum output burners. Like the other
four burners, it can be turned down from HI to
S/Mfor a wide range of cooking applications.

These burners are designed to quickly bring

large amounts of liquid to a boil. They have

a special POWER BOIL™ setting designed to
be used with cookware 10 inches or larger in
diameter for the extra large and 11 inches or
larger for the triple flame burner.

The center oval burner (on some models) is for

large pots/pans or for use with the griddle.

Advertising