GE CGS975SEDSS - Manual (Page 6)

Using the gas surface burners.
Throughout this manual, features and appearance may vary from your model.
Before Lighting a Gas Burner
■ Make sure all burners are in place.
■ Make sure all grates on the range are
properly placed before using any burner.
■ If your range has the Gos/Control Lockout
feature, moke sure it is disabled before
attempting to light the surface burners.
After Lighting a Gas Burner
■ Do not operate the burner for on extended
period of time without cookware on the
grate. The finish on the grate may chip
without cookware to absorb the heat.
■ Be sure the burners and grates ore cool
before you place your hand, a pot holder,
cleaning cloths or other materials on them.
How to Light a Gas Surface Burner
AWARNING
Push the control knob In and turn
It to the LITE position.
_________________________Burner flames that
are not covered by cookware may present a risk
of fire or clothing ignition. The griddle burner
should only be used with the griddle in place.
Failure to do so may result in serious injury.
Make sure all the surface burners are placed in
their respective positions.
Push the control knob in and turn it to the
LITE
position.
You will hear a little
clicking
noise—the sound
of the electric spark igniting the burner.
Turn the knob to adjust the flame size. If the
knob stays at LITE, it will continue to click.
When one burner is turned to
LITE,
all the
burners spark. Do not attempt to disassemble
or clean around any burner while another
burner is on. An electric shock may result, which
could cause you to knock over hot cookware.
Medium Small
models
TrI-rIng
burner Ion
some models)
Bridge burner
Ion some
models)
Sealed Gas Burners
Your gas range cooktop has sealed gas
burners. They offer convenience, cleanability
and flexibility to be used in a wide range of
cooking applications.
The smallest burner in the right rear position
is the simmer burner. On some models, the
right front position triple flame burner will be
the simmer burner. This burner can be turned
down to S/Mfor a very low simmer setting.
It provides precise cooking performance for
delicate foods such as sauces or foods that
require low heat for a long cooking time.
The medium (left rear) and the large (left
front) burners are the primary burners
for most cooking. These general-purpose
burners can be turned down from
HI
to
LO
to
suit a wide range of cooking needs.
The extra large burner (right front, triple flame
burner, or left front burner on some models) are
the maximum output burners. Like the other
four burners, it can be turned down from
HI to
S/Mfor a wide range of cooking applications.
These burners are designed to quickly bring
large amounts of liquid to a boil. They have
a special
POWER BOIL™
setting designed to
be used with cookware 10 inches or larger in
diameter for the extra large and 11 inches or
larger for the triple flame burner.
The center oval burner (on some models) is for
large pots/pans or for use with the griddle.
How to Light Bridge Burner for Model PGB980
I Be sure front griddle burner setting is the some
os rear burner and bridge burner combo.
Griddle Burner
serious injury.
■ Light rear burner fully at the Lite position.
■ Turn the same rear burner knob to the
Griddle Burner Hi setting to light the bridge.
For Rear Burner and Bridge
Burner Combo Only