Toshiba TEC MA-1300 - Manual (Page 14)

E01-11064
RECEIPT
ON
OFF
RECEIPT ON/OFF SWITCH ([RECEIPT ON/OFF])
This switch has two positions available: the ‘OFF’ position and ‘ON’ position.
When in the ‘OFF’ position, no receipt is issued from the register and sales are
printed on the journal roll only. When the switch is set to the ‘ON’ position,
sales are printed on both receipt roll and journal roll, then a receipt is issued
which is given to the customer.
RECEIPT
ISSUE
RECEIPT POST-ISSUE KEY ([RECEIPT ISSUE])
This key is used to issue the receipt of a sale when the sale has already been
finalized with the
[RECEIPT ON/OFF] switch positioned to OFF.
This key will not function if another sale is already under way.
Post-issue receipt is itemized receipt for a sale of maximum 30 lines.
Exceeding 30 lines, the post-issue receipt is total-only receipt
RF
RECEIPT FEED KEY ([RF])
This key is used to advance the receipt roll. It is operated by depressing the
key and holding it in that position until the paper has advanced to the required
position. This key is effective even when the
[RECEIPT ON/OFF] switch is in
the ‘OFF’ position.
JF
JOURNAL FEED KEY ([JF])
This key is used to advance the journal roil in the same fashion as the [RF]
key. These keys are useful if the operator, due perhaps to an interruption
while ringing up a sale, is unsure which items have already been entered. By
using the feed key the operator can see which figures have actually been
printed.
The [RF] and [JF] keys cannot be operated simultaneously.
7 8 9
4 5 6
1 2 3
0 00
NUMERIC KEYS (
)
These keys are used to enter numeric values such as amount, quantity, or
code number.
The maximum numeric entry digits vary according to each item or
operation.Depressing the [00] key once is the same as depressing the [0] key
twice consecutively.
- 10 -