Toshiba TEC MA-1300 - Manual (Page 16)

EO1-11064
Single-item Departments
If a department is programmed as Single-item, the department entry sequence
will immediately finalize the sale as cash sale without operating any of the
media keys when operated outside a sale (i.e. when no other items have been
entered within one receipt sequence). The Single-item Department will
function, however, just as an ordinary itemized department if operated inside a
sale.
PLU
PLU (Price-Look-Up) KEY ([PLU])
A “PLU" is an individual merchandise item programmed with its own item code
(PLU Code) and its link department. Each PLU can be programmed to a
“Preset PLU” (to auto-enter the preset price) or an “Open PLU” (to enforce a
price entry through the numeric keys each time)
To enter a Preset PLU:
I PLU Code I -► [PLUI
Max. 3 digits (1 to 999)
The preset price will automatically be read and
entered.
To repeat the same PLU price, depress the
[PLU] key only, after the above operation.
To enter an Open PLU:
I PLU Code [-► [PLU] Price [AMT]
The price indexed through the numeric keys will be
entered. To repeat the same PLU price, depress the
[AMT] key only, after the above operation.
CLEAR KEY ([C])
This key is used to clear a numeric entry or a declaration key (such as [RTN
MDSE] ) entry if prior to depressing a motorized key (a key to execute printing
of the entry, such as [DEPT] or media keys), or to correct any error condition
and cancel the alarm.
When the [C] key is depressed after obtaining a sale total including taxes by
the [ST] key, the same amount is displayed again.
- 12 -