Toshiba TEC MA-1300 - Manual (Page 8)

EOI'11064
4-2 CLERK-IDENTIFYING OPERATION
The MA-1300 adopts the following clerk-identifying operations.
• Code Entry Type, using the [CLERK No.] key (standard)
• Clerk Lock Type, using the clerk keys (option)
Registering operations cannot be executed without cierk-identifying operation.
4-2-1 CODE ENTRY TYPE
(must be operated outside a sale)
I Clerk No. I -
Oto 4
of the clerk
who operates the register
[CLERK No.] Sales entries are possible.
NOTE: Error results when the [CLERK No.] key is depressed
without indexing the clerk No., or alter indexing the numerics
except
for 0 to 4. However, when 0 is indexed as the clerk
No., ECR goes into the clerk “OFF” status. In this status,
the following keys only are operable.
Numeric keys ([00], [0] to [9]), [C], [CLERK No.], [RF],
and [JF].
4-2-2 CLERK LOCK TYPE
Key-lock Type
1 . 2 3
Clerk Keys (1, 2, 3, 4)
Each clerk should keep his/her clerk key. The register
will not operate unless one of these keys is inserted and
set to the correct position in the Clerk Locks. Each of
the keys may be inserted and pulled out in the neutral
position marked with the dot.
Push-key Type
1 2 3 4
Each clerk is assigned his/her own clerk key (1 to 4).
The register will not operate unless one of these keys is
pushed down.
- 4 -