Toshiba TEC MA-1300 - Manual (Page 70)

EOl-11064
CHARACTER ENTRIES
As already stated, there are two methods of operations for character settings for names or messages:
CHARACTER CODE ENTRY Method and DIRECT CHARACTER ENTRY Method.
CHARACTER CODE ENTRY Method
This method is to set a character by entering a Character Code and depressing the [#J key.
DIRECT CHARACTER ENTRY Method
This method is to set a character by directly depressing the Character Key on the TKB-1
Keyboard:
By using those character keys, the characters are directly entered. In this manual, sample
operations are attached to most of the programming operations. And at name or message
programming portions, characters are entered by the CHARACTER CODE ENTRY method.
Instead of this, you may depress the Character Keys. For example, instead of entering 11 [#l
(to enter character “A”), you may simply depress Character Key “A” on either of the above
keyboards.
On the following pages, Character Code Tables under the CHARACTER CODE ENTRY Method
and the TKB-1 Keyboard under the DIRECT CHARACTER ENTRY Method are shown. These
pages are to be referred to, every time the “Character Entries” sequence is contained in various
programming operations in this manual.
Read through these pages at least once first, so that you may know the appropriate method of
character entries using the ECR keyboard and/or option keyboard.
- 6 6 -