Toshiba TEC MA-1300 - Manual (Page 77)

EO1-11064
CLERK NAME PROGRAMMING (Submode No. 2)
Any time outside a sale
Mode Lock: SET
2 [@/FOR] ^ 1 Clerk Code I [ST] ~i ^ Character Entries [ST]
1 to 4; the code which
for Clerk’s Name
corresponds to each
Clerk. *
(max. 8 characters; see
CHARACTER ENTRIES.
page 66.)
> [AiyTL]
Repeat for another clerk code and name setting.
* (When the code is sequential from the previous-set code, the Clerk Code
entry may be skipped.)
NOTES: 1. For the name of each clerk, a maximum of 8 regular-sized or 4 double-sized
characters may be entered. A combination of both types is also available.
2. The programmed name will be printed on each receipt issued by the clerk. If no
name is programmed for the clerk, the clerk ID code, such as “1CL" “2CL*\ etc. will
be printed instead.
3. On the validation slips, the clerk ID code (instead of the name) will be printed
regardless of the name programmed here.
ex.)To program Clerk Code 1 with name “JONES”,
Clerk Code 2 with name “SMITH”:
Mode Lock to SET, Enter 2, depress [@/FOR].
Enter 1, depress [ST] (Clerk Code)
Enter 20, depress [#] (J)
Enter 25, depress [#] (O)
Enter 24, depress [#] (N)
Enter 15, depress [#] (E)
Enter 29, depress [#] (S)
Depress [ST] (to end Clerk 1)
Enter 2, depress [ST] (Clerk Code)
Enter 29, depress [#] (S)
Enter 23, depress [#] (M)
Enter 19, depress [ # ] ( ! )
Enter 30, depress [#] (T)
Enter 18, depress [#] (H)
Depress [ST] (to end Clerk 2)
Depress [AT/TL] to end this program.
TEC S T O R E
1343 PEACH DRIVE
PHONE: 87-6437
Thank you
Call ag
10-11-91 #0
P 0 2
ICL JONES
2CL SMITH
0007 09;17
- 73 -