Brake system warning light, Brake system warning, Light -27 – GMC 2011 Sierra User Manual

Page 175: Instruments and controls 5-27

Advertising
background image

Black plate (27,1)

GMC Sierra Owner Manual - 2011

Instruments and Controls

5-27

Emissions Inspection and
Maintenance Programs

Some state/provincial and
local governments may have
programs to inspect the on-vehicle
emission control equipment.
For the inspection, the emission
system test equipment is connected
to the vehicle’s Data Link
Connector (DLC).

The DLC is under the instrument
panel to the left of the steering
wheel. See your dealer if assistance
is needed.

The vehicle may not pass
inspection if:

.

The malfunction indicator lamp is
on with the engine running, or if
the light does not come on when
the ignition is turned to ON/RUN
while the engine is off.

.

The critical emission control
systems have not been
completely diagnosed by
the system. This can happen
if the battery has recently
been replaced or if the battery
has run down. The diagnostic
system evaluates critical
emission control systems during
normal driving. This can take
several days of routine driving.
If this has been done and the
vehicle still does not pass the
inspection, your dealer can
prepare the vehicle for
inspection.

Brake System Warning
Light

With the ignition on, the brake
system warning light comes on
when the parking brake is set. If the
vehicle is driven with the parking
brake engaged, a chime sounds
when the vehicle speed is greater
than 8 km/h (5 mph).

The vehicle brake system
consists of two hydraulic circuits.
If one circuit is not working, the
remaining circuit can still work to
stop the vehicle. For normal braking
performance, both circuits need to
be working

If the warning light comes on and
a chime sounds there could be a
brake problem. Have the brake
system inspected right away.

Advertising