Wiper blade replacement, Glass replacement, Blade – GMC 2011 Sierra User Manual

Page 465: Replacement -41, Glass replacement -41, Vehicle care 10-41

Advertising
background image

Black plate (41,1)

GMC Sierra Owner Manual - 2011

Vehicle Care

10-41

Park on a fairly steep hill, with the
vehicle facing downhill. Keeping
your foot on the regular brake, set
the parking brake.

.

To check the parking brake's
holding ability: With the engine
running and the transmission in
N (Neutral), slowly remove foot
pressure from the regular brake
pedal. Do this until the vehicle is
held by the parking brake only.

.

To check the P (Park)
mechanism's holding ability:
With the engine running, shift
to P (Park). Then release the
parking brake followed by the
regular brake.

Contact your dealer if service is
required.

Wiper Blade Replacement

Windshield wiper blades should
be inspected for wear or cracking.
See Scheduled Maintenance on
page 11‑2
for more information
on wiper blade inspection.

Replacement blades come in
different types and are removed
in different ways. To remove the
wiper blade:

1. Pull the windshield wiper arm

connector away from the
windshield.

2. Squeeze the grooved areas on

each side of the blade, and turn
the blade assembly away from
the arm connector.

3. Install the new blade onto the

arm connector and make sure
the grooved areas are fully set
in the locked position.

For the proper type and size, see
Maintenance Replacement Parts on
page 11‑11
.

Glass Replacement

If the windshield or front side
glass must be replaced, see your
dealer to determine the correct
replacement glass.

Advertising