Reading lamps, Lighting features, Entry lighting – GMC 2011 Sierra User Manual

Page 225: Exit lighting, Battery load management, Lighting features -9, Towing, Reading lamps -9

Advertising
background image

Black plate (9,1)

GMC Sierra Owner Manual - 2011

Lighting

6-9

Reading Lamps

For vehicles with reading lamps,
they are located on the overhead
console.

To turn on the reading lamps, press
the button located next to each
lamp. To turn them off, press the
button again.

The vehicle may also have reading
lamps in other locations. To turn the
lamps on or off, press the button
located next to the lamp.

If the vehicle has a DVD Rear Seat
Entertainment (RSE) system, press
the lamp lenses to turn the lamps on
or off.

The lamps are fixed and cannot be
adjusted.

Lighting Features

Entry Lighting

The vehicle has an illuminated entry
feature.

When the doors are opened, the
dome lamps will come on if the
dome override button is in the
extended position. If the dome
override button is pressed in,
the lamps will not come on.

Exit Lighting

The interior lamps come on when
the key is removed from the ignition.
They turn off automatically in
20 seconds. The lights do not come
on if the dome override button is
pressed in.

Battery Load
Management

The vehicle has Electric Power
Management (EPM) that estimates
the battery's temperature and state
of charge. It then adjusts the voltage
for best performance and extended
life of the battery.

When the battery's state of charge
is low, the voltage is raised slightly
to quickly bring the charge back up.
When the state of charge is high,
the voltage is lowered slightly to
prevent overcharging. If the vehicle
has a voltmeter gauge or a voltage
display on the Driver Information
Center (DIC), you may see the
voltage move up or down. This is
normal. If there is a problem, an
alert will be displayed.

Advertising