GMC 2011 Sierra User Manual

Page 412

Advertising
background image

Black plate (118,1)

GMC Sierra Owner Manual - 2011

9-118

Driving and Operating

Integrated Trailer Brake
Control System

The vehicle may have an Integrated
Trailer Brake Control (ITBC) system
for electric trailer brakes.

This symbol is located on the
Trailer Brake Control Panel on
vehicles with an Integrated Trailer
Brake Control system. The power
output to the trailer brakes is based
on the amount of brake pressure
being applied by the vehicle’s brake
system. This available power output
to the trailer brakes can be adjusted
to a wide range of trailering
situations.

The ITBC system is integrated
with the vehicle’s brake, antilock
brake, and StabiliTrak (if equipped)
systems. In trailering conditions that

cause the vehicle’s antilock brake
or StabiliTrak systems to activate,
power sent to the trailer's brakes
will be automatically adjusted to
minimize trailer wheel lock-up.
This does not imply that the trailer
has StabiliTrak.

2500 and 3500 series vehicles
with StabiliTrak have a Trailer Sway
Control (TSC) feature. See Trailer
Sway Control (TSC) on page 9‑124
.

2500 and 3500 series vehicles
with StabiliTrak have a Hill Start
Assist (HSA) feature. See Hill Start
Assist (HSA) on page 9‑70
.

If the vehicle’s brake, antilock
brake, or StabiliTrak systems are
not functioning properly, the ITBC
system may not be fully functional
or may not function at all. Make
sure all of these systems are
fully operational to ensure full
functionality of the ITBC system.

The ITBC system is powered
through the vehicle's electrical
system. Turning the ignition off
will also turn off the ITBC system.

The ITBC system is fully functional
only when the ignition is in ON or
in RUN.

The ITBC system can only be used
with trailers with electric brakes.

{

WARNING

Connecting a trailer that is not
compatible with the ITBC system
may result in reduced or complete
loss of trailer braking. There
may be an increase in stopping
distance or trailer instability which
could result in personal injury or
damage to the vehicle, trailer,
or other property. An aftermarket
controller may be available for
use with trailers with surge, air,
or electric‐over‐hydraulic trailer
brake systems. To determine the
type of brakes on the trailer and
the availability of controllers,
check with your trailer
manufacturer or dealer.

Advertising