82 driving and operating – GMC 2011 Sierra User Manual

Page 376

Advertising
background image

Black plate (82,1)

GMC Sierra Owner Manual - 2011

9-82

Driving and Operating

Disconnecting the Rear Vision
Camera

The rear vision camera must be
disconnected if the tailgate needs
to be removed.

To disconnect the camera:

1. Remove the license plate.

2. Disconnect the camera

connectors from the chassis
harness, located behind the
license plate, by pressing on the
release tab on each connector.

A. Chassis harness connector

B. Release tab

C. Camera connector

3. Plug the two exposed chassis

harness connectors together to
prevent contamination.

A. Chassis harness connector

B. Release tab

4. Feed the wiring harness through

the pickup box, then plug the
camera connectors together
to prevent contamination.

5. Remove the tailgate.

See Tailgate on page 2‑10
for more information.

6. Reinstall the license plate.

Reverse this procedure to reinstall
the rear vision camera and make
sure the grommet and connection
are secure.

Advertising