Driving and operating 9-115 – GMC 2011 Sierra User Manual

Page 409

Advertising
background image

Black plate (115,1)

GMC Sierra Owner Manual - 2011

Driving and Operating

9-115

Heavy-DutyTrailer Wiring Harness
Package

For vehicles equipped with heavy
duty trailering, the harness is
connected to a bracket on the hitch
platform. The seven-wire harness
contains the following trailer circuits:

.

Yellow: Left Stop/Turn Signal

.

Dark Green: Right Stop/Turn
Signal

.

Brown: Taillamps

.

White: Ground

.

Light Green: Back-up Lamps

.

Red: Battery Feed*

.

Dark Blue: Trailer Brake*

*The fuses for these two circuits
are installed in the underhood
electrical center, but the wires are
not connected. They should be
connected by your dealer or a
qualified service center. The fuse
and wire for the ITBC is factory
installed and connected if the
vehicle is equipped with an ITBC.
The fuse for the battery feed is
not required if the vehicle has an
auxiliary battery. If the vehicle does
not have an auxiliary battery, have
your dealer or authorized service
center install the required fuse.

If charging a remote (non-vehicle)
battery, press the Tow/Haul Mode
button, if equipped, located at
the end of the shift lever. This will
boost the vehicle system voltage
and properly charge the battery.
If the trailer is too light for Tow/
Haul Mode, or the vehicle is not
equipped with Tow/Haul, turn on
the headlamps as a second way
to boost the vehicle system and
charge the battery.

Advertising