GTCO QuikRuler - Users Guide User Manual
Page 13
QuikRuler 13
Selecting Your Language
Select
Choose
repeatedly or use
and
until Select Language is
displayed on line 1.
The currently selected language is displayed on line 2.
Use
and
repeatedly until you see the language that you want to use.
Select
or choose another option or function.
Choosing the Decimal Point Character
QuikRuler can display either a “.” or a “,” as the decimal point when numeric values are
displayed.
Select
Choose
repeatedly or use
and
until Decimal Pnt Char is
displayed on line 1.
The currently selected character is followed by the flashing cursor on line 2.
Use
and
to move the cursor to the character that you want to use.
Select
or choose another option or function.
Setting the Last Output Character
When
is selected, line 2 of the display is sent to the computer, only if a numeric
value is displayed. The line 2 value is terminated by the character selected in this option.
Select