GTCO QuikRuler - Users Guide - Manual (Page 7)

QuikRuler 7
switches. If the stylus is over the menu, the numbers will be replaced by minus signs
(- -----,-----) or, if the stylus is not in the tablet’s measuring area, the numbers will be
replaced by asterisks (* *****,*****). Press the tip of the stylus on a menu function
button to begin using QuikRuler.
Making Selections
Use either a stylus or a cursor to trace and measure drawings. You can also implement
either device to make selections from the QuikRuler menu. This manual assumes you have
a stylus.
Stylus
16-Button Cursor