GTCO QuikRuler - Users Guide User Manual
Page 15
QuikRuler 15
To set the units:
Choose
QuikRuler displays:
Measured (cm)
Displayed (km)
where, from the previous example, centimeters are the units you want to measure
from your drawing and kilometers are the units you want to display. The flashing
cursor follows the unit that may be changed.
Select
repeatedly or use
and
until you see the units you want
to use:
mm
cm
m
km
in
ft
yd
mi
Choose
or select another function.
Setting the Scale Manually
If you know the scale of the drawing you are working with, you can enter the measurement
scale manually.
Use the
to select the unit of measure for the first part of the scale. For
example, if 1 centimeter equals 3 kilometers, select cm as the unit of measure and
km as the displayed unit. For more information, see “Setting Units” earlier.
Select