GTCO Bit Pad Two - Users Guide User Manual

Page 19

Advertising
background image

Bit Pad Two 19


Switch Setting:

Stream Mode:


Switch Stream Mode:

Report Rate: DIP #1

Please note that one command sets both the mode and Report Rate. However, five
switches must be set to accomplish the same setting, two for the mode and three for the
Report Rate.

Stream Mode

Bit Pad Two continuously issues reports. It is not necessary to press a cursor or stylus
button.

NOTE: To eliminate redundant reports from being issued when the cursor or stylus is
stationary, use Stream Mode together with Increment Mode.

Switch Stream Mode

Bit Pad Two continuously issues reports when a cursor or stylus button is pressed.

Advertising