GTCO Bit Pad Two - Users Guide - Manual (Page 23)

Bit Pad Two 23
The effect is a restriction of the maximum delta between reported points. The delta is the
distance from the last report to the current one. The maximum delta varies, depending on
the tablet’s resolution setting. This relationship is quantified in the table below:
Increment Mode
Command: Switch Setting:
In Increment Mode, the Bit Pad Two sends a report only when the cursor or stylus has
traveled a minimum distance in the X or Y direction. This minimum distance is the
increment. The increment is defined by you and applies to both axes. Because redundant
reports are not sent to the host, Increment Mode is useful in reducing data output.