GTCO Bit Pad Two - Users Guide User Manual
Page 32
Bit Pad Two 32
Power
The power supply shipped with Bit Pad Two provides the proper power: 300mA at +12VDC
with +/-.5% regulation or better and 100 mA at -12VDC with +/-5% regulation or better.
Section B: Unpacking and Installation
Unpacking
Immediately upon receipt, inspect the package for damage. If damage exists:
1. Open the package and inspect the damage.
2. Report the damage to the carrier as soon as possible, preferably within 72 hours or
receipt.
3. Record the damaged items on the freight bill.
4. Write to the carrier: state that the shipment was damaged, when it was received and
request an inspection.
5. Keep the shipment in its original container until an inspection is made by the carrier.
6. Notify GTCO CalComp by Turning Technologies at 1.866.746.3015 or email us at
Otherwise, unpack the Bit Pad Two. The package should include:
Tablet with data/power cable attached
Four rubber feet
Bit Pad Two Data Tablet Technical Reference
Power supply
Purchasable options include:
Cursor/Stylus
Gender changer or reversing cable
Power cable (for international power supply)