GTCO Bit Pad Two - Users Guide - Manual (Page 20)

Bit Pad Two 20
Report Rate
The Report Rate is the number of reports the data tablet issues each second. Use it with
Stream or Switch Stream modes. Note that the Report Rate settings, such as 2 rps or 70
rps, are approximations. The rate at which the data tablet actually sends reports depends
on the baud rate and the report format. The following tables identify the rates you can
expect.
Report Rates Relative to Baud Rates for Reports in Binary Format
Report Rates Relative to Baud Rates for Reports in ASCII BCD Format
The Report Rates at 110, 150 and 300 baud are slower.