HONDA 2004 Odyssey - Owner's Manual - Manual (Page 122)

The flow-through ventilation system
draws in outside air, circulates it
through the interior, then exhausts it
through vents near the rear side
panels.
Set the temperature control dial or
the button to the lower limit.
Make sure the A/C is off.
Select
and Fresh Air mode.
Set the fan to the desired speed.
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
Select .
When you select , the system
automatically switches to Fresh
Air mode.
Set the fan to the desired speed.
Adjust the warmth of the air with
the temperature control dial.
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
). If it moves near the red zone,
turn off the A/C until the gauge
reads normally.
Press the A/C button to show the
A/C screen.
Select the desired mode and fan
speed icons on the screen.
Adjust the warmth with the
temperature button (
or ).
Press the A/C button. The light
above the button comes on when a
fan speed is selected.
Make sure the temperature
control dial is set to the lower limit.
Select
.
If the outside air is humid, select
the Recirculation mode. If the
outside air is dry, select the Fresh
Air mode.
Set the fan to the desired speed.
1.
2.
3.
4. 1.
2.
3.
1.
2.
3.
1.
2.
3.
4.
5.
67
CONTINUED
All except EX-L model with Navigation
System
EX-L model with Navigation System
All except EX-L model with Navigation
System
Vents, Heating, and A/C
Comf ort and Convenience Features
Ventilation Using the Heater Using the A/C
119
Main Menu Table of Contents