HONDA 2004 Odyssey - Owner's Manual - Manual (Page 70)

The trip meter shows the number of
miles (U.S.) or kilometers (Canada)
driven since you last reset it.
There are two trip meters: Trip A
and Trip B. Switch between these
displays by pressing the Select/
Reset button repeatedly. Each trip
meter works independently, so you
can keep track of two different
distances.
To reset a trip meter, display it, and
then press and hold the Select/Reset
button until the number resets to
‘‘0.0’’.
This shows the temperature of the
engine’s coolant. During normal
operation, the pointer should rise to
about the middle of the gauge. In
severe driving conditions, the pointer
may rise to near the upper white
mark. If it reaches the red (Hot)
mark, pull safely to the side of the
road. Turn to page
for
instructions and precautions on
checking the engine’s cooling
system.
250
Gauges
Instruments and Controls
Trip Meter Temperature Gauge
67
Main Menu Table of Contents