HONDA 2004 Odyssey - Owner's Manual - Manual (Page 18)

CONTINUED
Insert the hook at the end of the
shoulder belt plate into the metal
loop on the latch plate marked
CENTER. Make sure the shoulder
belt is not twisted, as a twisted belt
can cause serious injuries in a crash.
Pull on the shoulder belt to make
sure it is securely attached. Unlatch the metal shoulder belt plate
from the anchor on the ceiling, then
extend the belt by pulling the metal
plate.
The front seats and second row seats
have adjustable seat belt anchors. To
adjust the height of an anchor, press
and hold the release button and slide
the anchor up or down as needed
(the anchor has four positions).
Protecting Adults and Teens
Driver and Passenger Saf ety
Using the Lap/Shoulder Belt in the
Center Position of the Third Row
15
METAL
HOOK
LATCH PLATE
RELEASE
BUTTON
METAL PLATE
Main Menu Table of Contents