HONDA 2004 Odyssey - Owner's Manual - Manual (Page 136)

CONTINUED
To play a CD, the ignition switch
must be in the ACCESSORY (I) or
ON(II) position.
You operate the CD player with the
same controls used for the radio.
The number of the track playing is
shown in the display. The system will
continuously play a CD until you
change modes.
Insert a CD into the CD slot. The
drive will pull the CD in the rest of
the way to play it. When the system
reaches the end of the disc, it will
return to the beginning and play the
disc again.
You can also play 3-inch (8-cm) discs
without using an adapter ring.
To play the radio when a CD is
playing, press the AM/FM button.
Press the CD button again to switch
back to the CD player.
To play the tape when a CD is
playing, insert a tape in the player (if
available). If a tape is in the player,
press the TAPE button. Press the
CD button again to switch back to
the CD player. The cassette player is
optional on EX and EX-L models.
If you turn the system off while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
you turn the system back on, the CD
will begin playing where it left off (at
the same disc and track on LX
model).
Each time you press and
release / or push up the
SKIP switch, the player skips
forward to the beginning of the next
track. Press and release
/
button, or push down the SKIP
switch to skip backward to the
beginning of the current track. Press
or push down it again to skip to the
beginning of the previous track.
To move rapidly within a track, press
and hold the
/ or /
side of the SKIP bar. You will
see CUE or REW in the display. On
LX model, push and hold the SKIP
switch. You will hear a beep when
the system begins to move.
To continuously replay
a track, press and release the RPT
button. You will see RPT in the
display. Press the RPT button again
to turn it off.
Optional on LX model
Playing a CD
Comf ort and Convenience Features
To Play a CD SKIP
REPEAT
133
Main Menu Table of Contents