HONDA 2004 Odyssey - Owner's Manual - Manual (Page 65)

This indicator has three functions:
It comes on as a reminder that you
have turned off the Traction
Control System.
It flashes when the TCS is
regulating wheelspin.
If it comes on and stays on when
the Traction Control System is on,
it indicates that there is a problem
in the TCS.
This indicator also comes on when
you turn the ignition to ON (II) and
goes off after the engine starts. See
page
for more information on
the TCS.
This indicator comes on for a few
seconds when you turn the ignition
switch to ON (II). It will then go off
if you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page
).
This indicator also blinks several
times when you turn the ignition
switch from ON (II) to ACCESSORY
(I) or LOCK (0).
This indicator comes on for a few
seconds when you turn the ignition
switch to ON (II). If it comes on at
any other time, there is a problem in
the power sliding door system. With
this indicator on, move the main
switch on the dashboard to the OFF
position, and have the system
checked by your Honda dealer as
soon as possible. You can still open
or close each sliding door manually.
For more information on the power
sliding doors, see page
.
1.
2.
3.
192
76
84
EX and EX-L models only
Instrument Panel Indicators
Instruments and Controls
Traction Control System
(TCS) Indicator Immobilizer System
Indicator Power Sliding Door
Indicator
62
Main Menu Table of Contents