HONDA 2004 Odyssey - Owner's Manual - Manual (Page 245)

Place the jack under the jacking
point nearest the tire you need to
change. It is pointed to by a
mark molded into the underside of
the body. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch. Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground.
Do not attempt to forcibly pry the
wheel cover off with a screwdriver or
other tool. The wheel cover cannot
be removed without first removing
the wheel nuts.
Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up.
13. 14.
15.
On LX model
Changing a Flat Tire
Taking Care of the Unexpected 242
JACKING POINT
EXTENSION
WHEEL
WRENCH
WHEEL
COVER
Main Menu Table of Contents