Vents, heating, and a/c – HONDA 2004 Odyssey - Owner's Manual User Manual

Page 124

Advertising
background image

Select

. The system

automatically switches to Fresh
Air mode and turns on the A/C.
Select

.

Set the fan and temperature
controls to maximum level.

To clear the windows faster, you can
close the dashboard corner vents by
rotating the wheel next it. This will
send more warm air to the
windshield defroster vents. Once the
windshield is clear, select the Fresh
Air mode to avoid fogging the
windows.

For your safety, make sure you have
a clear view through all the windows
before driving.

The Automatic Climate Control
system can adjust the fan speed and
airflow levels to maintain the interior
temperature you select.

Press the Auto button. With
Navigation System, the light in the
button comes on.

Set the desired temperature by
turning the Temperature Control
dial. You will see FULL AUTO in
the system’s display.

Set the desired temperature by
pressing

to raise the

temperature or

to lower the

temperature. The selected
temperature will show in the
temperature display on the control
panel.

The system automatically selects the
proper mix of conditioned and/or
heated air to raise or lower the
interior temperature to the
temperature you selected.

If you set the temperature to its
lower limit or its highest limit, the
system runs at full cooling or heating
only. It does not regulate the interior
temperature.

In cold weather, the fan will not
come on automatically until the
heater starts to develop warm air.

When the

system is in FULL AUTO, the rear
A/C passenger control dials cannot
be used. Turning the rear A/C
control dial on the front panel
disables the FULL AUTO function.

1.

2.

1.

2.
3.

Without Navigation System

With Navigation System

EX and EX-L models

Vents, Heating, and A/C

Comf ort and Convenience Features

To Remove Exterior Frost or Ice
From the Windows

Using Automatic Climate Control

Rear A/C Control

121

Main Menu

Table of Contents

Advertising