Changing a flat tire – HONDA 2004 Odyssey - Owner's Manual User Manual
Page 248
Adjust the seat-back of the third
seat to the upright position (see
page
). Install the bracket and
the bracket mounting bolt to the
attachment point as shown, and
tighten the bolt. Make sure the
bracket is securely locked.
Install the flat tire on the bracket
with the inside of the wheel facing
toward you. Put the tire mounting
wing bolt in the attachment point
through one of the five wheel nut
holes and the bracket as shown.
Poke holes in the vinyl bag. Secure
the flat tire by tightening the wing
bolt.
When the third seat is folded, the
flat tire is secured to the floor on
top of the folded seat. Pull up the
carpet on the attachment point and
remove the plastic screw as
described in the previous
procedure.
Remove the wing bolt from the
bracket that is attached to the
spare tire lid.
23.
Storing the Flat Tire on the Floor
CONTINUED
Changing a Flat Tire
Taking Care of the Unexpected
245
BRACKET
TIRE MOUNTING WING BOLT
Main Menu
Table of Contents