Interlogix MC355-1T/1S User Manual - Manual (Page 29)

IFS MC355-1T/1S User Manual 25
The SNMP Management Web page includes the following configurable data:
SNMP Agent Disable or enable the SNMP Agent function, the default mode is
“Disable”.
SNMP Read
Community Input the characters for SNMP Read Community, up to a maximum of
16 characters.
SNMP Write
Community Input the characters for SNMP Write Community, up to a maximum of
16 characters.
System Name Input the characters for System Name, up to a maximum of 16
characters.
System Location Input the characters for System Location, up to a maximum of 16
characters.
Contact Input the characters for Contact person, up to a maximum of 16
characters.
Apply Button Press the “Apply” button for save the latest configuration of the MC355-
1T/1S.
Note: The MC355-1T/1S supports SNMP v1/v2c protocol.
Figure 20: SNMP Trap Receiver Configuration Web page screen