Interlogix MC355-1T/1S User Manual - Manual (Page 51)

IFS MC355-1T/1S User Manual 47
This function provides TS-1000 Loop Back Test of the MC355-1T/1S. Press the
“Apply” button to run Loop Back Test and see the TS-1000 Loop Back Test
Result of the MC355-1T/1S, also press the “Refresh” button to renew the Web
screen.
Figure 43: Remote TS-1000 Loop Back Test Web Page screen
The TS-1000 Loop Back Test Web page includes the following configurable data:
TS-1000 Loop Back Test
Send Packet Number Input the number for packet send and the available options is 1 to 255.
The default is16.
Apply Button Press this button to save the latest configuration of the MC355-1T/1S.
Refresh Button Press the “Refresh” button to refresh the current status.
TS-1000 Loop Back Test Result
Result Displays the TS-1000 Loop Back Test Result. Fail or Pass.
Result counter Displays the value of Counter Result.
Note: Please use the MC355-1T/1S as the remote device.
802.3ah Setup
When enabling 802.3ah OAM function, all 802.3ah OAMPDU packets will trap to
the embedded CPU. The Software will implement an auto discovery procedure.
With hardware support, the software controls the 802.3ah remote loop back
procedure. Hardware can also detect a dying gasp event and interrupt the CPU