Interlogix MC355-1T/1S User Manual - Manual (Page 43)

IFS MC355-1T/1S User Manual 39
Figure 35: VLAN Per Port Setting Web Page screen
The VLAN Per Port Setting Web page includes the following configurable data:
Port TP port and Fiber port.
Egress Link Type Provides Egress Link Type options for TP port and Fiber port, the
available options are:
• UnTag
• Tag
• ByPass
Default mode is UnTag.
PVID Allows PVID assignment for the TP port and the Fiber port, the
available options are 1 to 4094. Default mode is 1 to 16.
Accept Frame Type Define the Accept Frame Type and the available options are
• All
• Tagged Only
Default mode is All.
Ingress Filter Disable or enable the Ingress Filter function. Default mode is Enable.
Apply Button Press this button to save the latest configuration of the MC355-1T/1S.
Q-in-Q VLAN Setting
When enabling the Q-in-Q function, MC355-1T/1S can insert or remove 4-bytes
Q-in-Q tag in the received 802.3 frames. The Q-in-Q tag value is a user defined
value. And in default condition, the Q-in-Q tag format is same as VLAN tag. On a
regular application, enable two port’s Q-in-Q function; UTP Port set to insert Q-in-
Q tag and Fiber port set to remove Q-in-Q Tag. For aggregation layer switch, it
will check Q-in-Q tag only, and ignore the VLAN tag from the corridor layer