Interlogix MC355-1T/1S User Manual - Manual (Page 49)

IFS MC355-1T/1S User Manual 45
Remote TS-1000 OAM Setup
The Remote TS-1000 OAM Setup is an advanced remote device monitor feature
that allows you to remotely monitor and receive an automatic notify status
indication.
Remote monitor
1. The user instructs the Center Media Converter to issue a status notification
request frame defined in TS-1000 to get status of the terminal Media Converter.
2. The Terminal Media Converter receives the status notification request frame
and sends out a status response frame, which carries its current status.
Autonomous notification
1. The Terminal Media Converter notifies the center Media Converter
autonomously with a status notification indication, if any change occurs in the
status monitored internally by the terminal Media Converter.
2. The Center Media Converter if it is supported notifies the terminal Media
Converter autonomously with a status notification indication, if any change
occurs in the status monitored internally by the center Media Converter.
This function provides Remote TS-1000 OAM Setup of the MC355-1T/1S. Press
the “Apply” button to save the latest configuration of the MC355-1T/1S.
Figure 42: MC355-1T/1S Remote TS-1000 OAM Setup Web Page screen