Interlogix MC355-1T/1S User Manual - Manual (Page 42)

38 IFS MC355-1T/1S User Manual
Figure 34: VLAN Group Web Page screen
The VLAN Group Web page includes the following configurable data:
VLAN Mode Disable or enable the IEEE 802.1Q VLAN operation mode. Default
mode is Disable.
Management VLAN
Group Define the Management VLAN group. Default mode is VLAN1.
VLAN Group Indicates that the VLAN Group from 1 to 16.
VID Defines the VLAN Group ID and the available options are 1 to 4094.
TP Assigns the TP port into VLAN Groups.
Member
Fiber Assigns the Fiber port into VLAN Groups.
Apply Button Press this button to save the latest configuration of the MC355-
1T/1S.
Note: When changing the Management VLAN Group settings, please make sure
that the TP or fiber port that connects to the administrator PC is in the same
VLAN Group; otherwise, connection will be lost making the further management
impossible until the unit is reset to factory defaults by pressing the reset button
for 10 seconds.
VLAN Per Port Setting
This function provides IEEE 802.1Q VLAN per port setting for TP and Fiber port
of MC355-1T/1S. Press the “Apply” button to save the current configuration of
MC355-1T/1S. Figure 35 illustrates 802.1Q VLAN per Port Setting screen.