Interlogix MC355-1T/1S User Manual - Manual (Page 34)

30 IFS MC355-1T/1S User Manual
Port
TP port and Fiber port.
Link
Displays the current connection speed and duplex mode of TP or Fiber port.
Mode
Configures the TP or Fiber port speed and operation mode. Draw the menu bar to select the mode.
TP Port:
y Auto Speed Setup Auto negotiation
y 1000 Full Sets 1000Mbps Full-Duplex mode
y 100 Full Sets100Mbps Full-Duplex mode
y 100 Half Sets 100Mbps Half-Duplex mode
y 10 Full Sets 10Mbps Full-Duplex mode
y 10 Half Sets 10Mbps Half-Duplex mode
Default mode: Auto Speed.
Fiber Port:
y Auto Speed Setup Auto negotiation
y 1000 Full Sets 1000Mbps Full-Duplex mode
Default mode: Auto Speed.
Flow Control
Disable or Enable Flow Control of TP or Fiber port.
Enable: IEEE 802.3x Flow Control is enabled on Full-Duplex mode or Backpressure is enabled
on Half-Duplex mode
Disable: No Flow Control or backpressure function on neither the Full-Duplex nor Half-Duplex
mode
Default mode: Disable
Ingress Rate Limit The value of inbound traffic limitation in kilobit-per-second (kbps). The available options are :
• No Limit
• 512K
• 1M
• 2M
• 4M
• 8M
• 10M
• 50M
• 100M
• 500M
Default mode: No Limit
The Ingress Rate Limit configuration field as shown in Figure 28.
Egress Shaping The value of outbound traffic limitation in kilobit-per-second (kbps). The available options are :
• No Limit
• 512K
• 1M
• 2M
• 4M
• 8M
• 10M
• 50M
• 100M
• 500M
Default mode: No Limit
The Egress Shaping configuration field as show in Figure 29.
Apply Button
Press this button for save the latest configuration of the MC355-1T/1S.
Refresh Button
Press the “Refresh” button to refresh current status.