Juniper Systems Trimble Lassen GPS Expansion Pod - Manual (Page 11)

GPS Expansion Pod
11
GPS Antenna Bracket Removal
The GPS antenna bracket can be removed and reattached
depending on your needs. To remove the GPS antenna
bracket from your Field PC, complete the following steps:
1.
Unscrew the antenna cable from the Field PC
expansion pod.
2.
Loosen the thumbscrews on the antenna bracket so
that the antenna bracket and the two knobs at the end
of the antenna bracket are no longer securely fastened.
3.
Pull the antenna bracket off of the Field PC.
The antenna bracket can be reattached to the Field PC by
following the instructions in the Attaching the Antenna section.
GPS Installation Program
The GPS Setup Program is installed on your Field
PC before it is shipped. In the event that the GPS
program gets removed from your Field PC and needs
to be reinstalled, use the GPS installer on the User
Documentation and Install CD shipped with the Field PC.
P/N 20208-00 Copyright 07/2008