Juniper Systems Trimble Lassen GPS Expansion Pod - Manual (Page 5)

GPS Expansion Pod

1.
Go to Start > Programs > GPS Pod Setup, and the GPS
Receiver Port Settings screen opens.
At the bottom of the screen, there are three function
buttons:
Get Settings
Apply Settings
Reset Receiver
Get Settings
The Get Settings button is used to see the receiver’s current
settings without changing the settings. Pressing Get
Settings performs a search for the GPS receiver, the search
can take up to one minute to find the settings. Once
the search is complete, the current settings for the GPS
receiver are displayed.
Apply Setting
Tap on the Apply Settings button to save and apply new
settings. To make sure that your settings are applied
correctly, press Get Settings to check the parameters.


