Bios messages, Power on self test – Juniper Systems Allegro DOS Manual User Manual

Page 110

Advertising
background image

110 Allegro DOS Owner’s Manual

BIOS Messages

Power On Self Test

When the Allegro powers up, it goes through a series of internal
tests and diagnostics. This is called the Power On Self Test (POST).
During these tests, messages are displayed on the screen or a
series of beeps are heard. If you see an error message during this
process, try resetting the Allegro by holding the On/Off key down
for 8 seconds. If the error persists, contact our Customer Service
Department.

Advertising