Juniper Systems Allegro CE Manual - Manual (Page 139)

Windows CE Page 4-79
Troubleshooting
If you have any problems establishing communication between the
Allegro and the desktop PC, check the communication settings on
both computers and make sure the communication cable is firmly
connected to the correct ports. Refer to the installation instructions for
ideas on settings to review.
▲ ▲ ▲ ▲ ▲ New Partnership Set Up
After you have successfully connected the Allegro to the desktop PC
the following screen will appear:
You can select Yes to set up a partnership or No to connect as a guest.
The advantage to setting up a partnership is that each time you
connect the Allegro to the desktop PC you are not asked which type of
connection you want. The Allegro automatically connects as a
partner. If you select Yes continue on to the Setting Up a Partnership
section. If you select No, and want to connect to the Allegro and
desktop PC as a guest, read steps for Connecting as a Guest later in this
chapter.